The amount of water required to run an average-sized textile manufacturing firm efficiently is significant. With water being a scarce commodity as well as the primary resource in almost every stage of textile manufacturing, large storage tanks offer an opportunity for such companies to harvest rainwater. That being said, it is one thing to install industrial-sized storage tanks and another to utilise them effectively.
Notably, rainwater harvesting at the industrial scale is all about efficiency, which entails harvesting as much water as possible to derive value from the industrial-sized tanks. This article highlights tips that water management personnel in textile manufacturing firms can use to put storage tanks to good use by increasing the amount of rainwater harvested.
Increase Roof Surface Area -- In a rainwater collection system, one of the most critical elements is the catchment area, which primarily includes roofs of buildings. If a textile manufacturing plant has a small roof surface area but installs large storage tanks, the chances are that a lot of rainwater will go to waste. Therefore, to trap as much rain as possible in the storage tanks, the catchment area must be able to direct massive amounts of rainwater into the reservoirs. To achieve this, water management personnel can increase the surface area of the buildings' roofs. Doing so would ensure that as much rainwater as possible finds its way through the gutters into the storage tanks.
Install More Gutters -- Another critical element of rainwater harvesting is the gutter system. With a few gutters or pipes directing rainwater into storage tanks, it would take quite some time to fill industrial size storage tanks. What is recommended is a piping system that supplies the storage tanks within the shortest time possible. It is especially critical if the plant is located in areas where rainfall seasons do not last long. Disguising gutters in concrete fences or some other aesthetic features will help improve the rate and efficiency with which harvested rainwater is delivered into the storage tanks.
Reduce Roof Pitch -- The steepness of a roof determines how much rainwater is lost or redirected into the gutters and rainwater piping system. If the roof has a high pitch, then most of the rain will not reach the storage tanks because it would hit the roof and splashes to the ground. However, if the roof has a low pitch, then most of the rainwater that splashes on the roof will still land on the roof and find its way into the large storage tanks. Therefore, if you want to fill your industrial storage tanks quickly and efficiently, then lower the pitch of the roof.
For more information, contact companies like Tanks Direct.
Share
